Mediana P10 Servisní příručka Strana 44
- Strana / 110
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
38
Save Current Values as Power-On Default
The current settings become the power-up defaults next time the unit is powered up.
Save Factory Default Setting as Power-On Default
The factory default settings become the power-up defaults next time the unit us powered
up. See Table 12.
Alarm Suspension Period
If the Alarm Suspension Period is set to anything other than OFF or Indefinite, the
audible alarm is not activated for the specified time interval by pressing and holding the
Alarm Stop Button for 2 seconds. If OFF is selected, the audible alarm suspension is not
allowed to activate. If Indefinite is selected, the audible alarm suspension continues until
canceled.
Audible Alarm Silence Period
Pressing the Alarm Stop Button temporarily silences alarms for the period selected in
the Service Menu. The factory default alarm silence period is 60 seconds.
Alarm Reminder Tone
The Alarm Reminder Tone menu is activated with the user-selectable period in the
Service Menu. The interval can be set to OFF, 3 or 10 minutes. If OFF is selected, the
reminder tone will be disabled.
Audible Alarm Type
GN924 or IEC60601-1-8
The M30 has two different audible alarm types, called GN924 and IEC60601-1-8. They
have different tone pitch and on-off beep patterns. (Refer to Alarms and Limits section in
the operator’s manual)
Language
The selected language will be used for all the text shown on the display; and it will be
effective from the next time the monitor is powered up.
NIBP TEST MODE
These menus facilitate performing verification testing for the NIBP subsystem.
For a detailed procedure, refer to the Performance Verification section.
Table 10. NIBP Test
Tests Description
Pressure Sensor
Accuracy Test
Verifies that the pneumatic pressure sensor accuracy is
within the specification.
Air Leakage Test Verifies that the pneumatic pressure air leakage is within
a pressure drop of 6 mmHg/min.
Inflation Speed Test Verifies that the pneumatic pressure inflation is at the
time of 4.0 to 7.5 seconds (to 250 mmHg).
Deflation Speed Test Verifies that the proportional valve will open and bleed off
pressure at the rate of 2.8 to 6.0 mmHg/second
(260mmHg – 30mmHg).
Return Returns to Service Menu.
- SERVICE MANUAL 1
- CONTENTS 3
- Figures 5
- SAFETY INFORMATION 7
- Manual Overview 8
- Related Documents 8
- Front Panel Components 11
- Rear Panel Components 12
- Left Panel Components 13
- Right Panel Components 14
- ROUTINE MAINTENANCE 15
- Batteries 16
- Environmental Protection 16
- PERFORMANCE VERIFICATION 17
- Performance Tests 18
- General Operation Tests 20
- Safety Tests 33
- Verification Check Sheet 37
- General 41
- Service Menu 41
- Others 48
- FIRMWARE DOWNLOAD 49
- TROUBLESHOOTING 53
- Troubleshooting Guide 54
- EEE009 SpO 59
- DISASSEMBLY GUIDE 63
- Replacement Level Supported 65
- Prior to Disassembly 65
- Fuse Replacement 65
- Battery Replacement (A1) 65
- A2. Printer disassembly 67
- Monitor Disassembly 68
- Before steps B and C (2) 69
- B1. Front case disassembly 71
- B2. LCD disassembly 71
- B3. Key board disassembly 71
- Figure 26. M30 Exploded View 79
- SPARE PARTS 81
- PACKING FOR SHIPMENT 85
- SPECIFICATION 87
- Electrical 88
- Environmental Conditions 88
- Tone Definition 89
- Measurement Parameters 90
- 40 to 200 BPM 92
- 20 to 300 BPM 93
- ±3 BPM 93
- 0 to 99 % 93
- Compliance 96
- Item Compliant with 97
- SYSTEM PROCESSING 99
- Li-ion Battery 100
- 3S1P/2200mAh 100
- 3S2P/4400mAh 100
- 3S3P/6600mAh 100
- 102
- MSP430F1121A 104
- ECG Processing 105
- NIBP Processing 105
- Processing 107
- 2 (mmHg) 108
- Respiration Processing 109
- Temperature Processing 110
Lenovo 5053A1U manuali
Manuali dei proprietari e guide per l'utente per Mini PC Lenovo 5053A1U.
We fornisce 1 manuali pdf Lenovo 5053A1U per scaricare gratuitamente in base al tipo di documento: Scheda Tecnica
Komentáře k této Příručce